450 T ANCHOR HANDLING WINCH BRATVAAG, UNUSED NEVER INSTALLED FOR SALE

new never installed , always been stored under shelter

1 BRATTVAAG ANCHOR HANDLING WINCH -WATERFALL TYPE
1200 mm diam.x 3200 mm diam x 2700 mm
WIRE CAPACITY 2335 m of 90 mm diam. wire
Brake holding load
550 tons on towing drum 1st layer
550 tons on anchor handling drum 1st layer

TUNNEL THRUSTER, ROLLS ROYCE TT1650 CP WITH TUNNEL, 1770/374 RPM. UNUSED

Quantity: 2

EQUIPMENT DETAILS
Rolls Royce Marine AS
Type: Kamewa Ulstein TT1650 CP with Tunnel
Year of manufacture: 2007
Kamewa Ulstein / Rolls Royce Bow-thrusters
Power: 800kW,
Shaft Speed 1770/374 rpm
never used

Dahiatsu GENERATOR SET FOR SALE

Model 8DK-28
Year of manufacture: 2007
Generator Rated 2400 kW, 690V, 60 HZ, TIER I Certified. TIER II upgrade possible
10 UNITS
They are still in original boxes
Hours: 0 (these are new surplus units).
The units are in "like new" condition and preserved balled by Daihatsu service personnel.

4000 Tons Lifting Equipment for transfer of Heavy Duty structures

- N.3 Hydraulic Power Packs for combined operation with n.3 pumps. HP 11 each.
- N.50 Hydraulic jacks
- Lifting Capacity: 80 tons each
- External Diameter: 300 mm
- Min. height: 240 mm
- Lifting capacity: 150 mm

Second hand Diesel Hydraulic power pack for driven Boogies only.
- Diesel friven 12 cylinders Deutz type F12 L 413, HP 288, 2500 RPM
- Galdabini hydraulic pump variable capacity manual control
- Minimum oil capacity: 12 l/min - Maximum oil capacity: 248 l/min - Pressure: 250 bar - Diesel tank - Manometer and distributors

EAST TUG SH 113 13 - FOR CHARTER AND/OR SALE

Azimuthal Tug
Built 1997, Spain
Class: RINA 100-A-1.1 RECOIL - FFQ -1 IAQ-1 TPF (KN)490
Length 30m
Beam: 10m
Draft moulded: 4,3 m
Tonnage: Gt: 360.00 ts,
Main Engines: 2 x MAK 1520 kw @1000 rpm
2 x azimuth propellers Lips CP
BOLLARD PULL 50 tons
FIRE FIGHTING FI-FI 1

EAST TUG SH 114 13 - FOR CHARTER AND/OR SALE

Azimuthal Tug
Built 2003, Turkey
Class: RINA UNRESTRICTED NAVIGATION SALVAGE TUG FIRE FIGHTING SHIP 1
C CLASS
LPP: 28.24 m
Beam: 10,50 m
Draft moulded: 4,3 m
Tonnage: Gt: 380.00 ts,
Main engine: 2 x 1566 KW- CATERPILLAR 3516B @1800 RPM
Props: 2 x Schottel 1212 CP azimuth
Bollard pull 54 t
FIRE FIGHTING Unitor FI-FI 1 system

EAST TUG SH 115 13 - FOR SALE

Azimuthal Tractor Tug
Built 2001, Spain
GL Hull+100 A5 Tug. Machinery : +MC AUT
Dims 27 x 9,70 x 3,90 m, Draft 5,37 m
269 GT
Main engines : 2 x Bergen 3.604 BHP
Propulsion : 2 x Schottel SRP1010
Bollard pull 45 t

EAST TUG SH 112 12 - FOR SALE

Azimuth Tractor Tug
Built 2005, Spain
BV 1+HULL+MACH, Tug FIFI Ship 1,
Unrestricted Navigation + AUT - UMS
Dims 29,50 x 11 x 4 m,
Draft 6,95 m
386 GT
Main Engines: 2 x Bergen C25 33L8P ttl 6,528 bhp
Propulsion : 2 x Aquamaster US 255 FP
80 ts bollard pull

EAST/CRA/SH12 030 300T OFFSHORE PEDESTAL CRANE FOR SALE

Main Design - Det norske Veritas, Rules for certification of Lifting Appliances
Certification Det norske Veritas including CRANE notation

Additional requirements:
Power supply
Electric Main Power 690 V / 60 Hz Max. consumed power approx. 1210 kW B
Max. starting current 1400 A approx. (1 motor running, 1 starting) B
Emergency power 450 V / 60 Hz Max. installed power approx. 35 kW C
UPS 230 V / 60 Hz if required for AWL's
Performance Data
Lifting Capacity (SWL) - Whip Hoist 2-falls Tuggers (2x)
Harbour lifts 300 t @ 25.5 m, 43 t @ 83 m 30 t @ 87 m 0-10 t B
Constant tensioning (1-fall) - 5 t @ 100 m/min 0-30 m/min C
Working Radius - Main Hoist Whip Hoist
Max. Radius 83 m 87 m
Min. Radius 10 m 11.5 m

EAST CRA 12 038 – 35t @12 m
OFFSHORE PEDESTAL CRANE FOR SALE
USED ONLY FOR TEST - LIKE NEW!

ELECTRO HYDRAULIC DRIVE
CRANE TYPE RL-T 2650 -50 LITRONIC
400KW S6-40% DUTY CYCLE
STAR DELTA STARTER
AIR VENTILATED COOLING
HEATER AND THERMISTOR PROTECTION ON ELECTRIC MOTOR AND STARTER
MAIN POWER SUPPLY 440 V 60HZ 3PH
35T@12 M

EAST BARGE SH 122 12 - SELF PROPELLED FLOATING CRANE
FOR CHARTER OR SALE!

L.O.A. 46,13 m x 20,22 m
Light Draught (m): 2,37 Load Draught (m): 2,87
Cargo Deck Area (m²): 350,00 Capacity (m.t.): 500,00
Mooring Equipment:
(n° 2) anchor winches 6 Tons/each + (n° 2) capstans 4 Tonnes each
(n° 4) winches 20 Tons/each 500 mts steel cable Ø 32 mms

EAST BARGE SH 134 12

1600 tons CRANE BARGE FOR SALE OR CHARTER
The barge can be completed as accommodation crange barge or pipelay barge.

Length overall: 136m
Breadth moulded: 36m
Depth moulded: 8m
Design draft: 5m
DWT: 19,800 ton
GT: 10,873 ton
equipped with 1600 t crane